What Is The Taterial Description Of The Indoor Playground Equipment?

The game equipment used by indoor playground must be certified by the relevant departments to meet the operating conditions before it can be used. Regarding this point, the country has mandatory regulations. The material description of indoor playground equipment must be understood by the relevant manufacturers in advance to avoid the use of substandard materials.

The article contains the following:

1. Fire retardant

2. No toxic substances

3. In line with structural mechanics

4. Buyer's responsibility

First, fire retardant

In the material description of indoor playground equipment, several items are covered with each other. For example, trampoline facilities must use fire-retardant and flame-retardant elastic materials to avoid burning due to excessive fire. Since most game indoor playground equipment is made of rubber, plastic, fiber, etc., surface materials, The ignition point of these materials is relatively low, which can easily lead to fire, which can lead to uncontrollable.

Second, no toxic substances

Residues of toxic substances are often the enemy of health, especially a large amount of rubber and plastic are by-products of the chemical industry, which will release formaldehyde and other harmful chemical gases, especially formaldehyde will damage the nerves and blood of the human body, resulting in the appearance of Canceration, the release period of formaldehyde is more than 15 years, so the exterior coating and internal materials of manufacturing indoor playground equipmen should not use excessive formaldehyde to avoid harm to minors.

Third, conform to structural mechanics

The material also has certain load-bearing requirements during the production process. It must not collapse in the middle, causing indoor playground equipment damage or personnel injury. The manufacturer must abide by the responsibility system and carry out multiple inspections of the products shipped from the factory. Many small manufacturers often cut corners to reduce profits and use inferior quality. The substitution of raw materials caused accidents during the operation.

Fourth, the buyer’s responsibility

The indoor playground equipment production must be supervised throughout the process. After the buyer pays, he should send staff to the manufacturer to supervise the other party's production process, and check the raw materials to avoid using inferior materials. When the facility is installed on the site, it must also pass the relevant a quality certificate can only be issued by the quality inspection of the department, which requires that the steel structure parts are not exposed, and the elastic members and flexible members must meet the safety standards.

The material description of the indoor playground equipment can be downloaded on the national quality supervision website. The manufacturer must meet the quality supervision standards before production. Otherwise, all legal and disputes arising will be the responsibility of the manufacturer. Some purchasers want to obtain cheap indoor playground equipment and deliberately require the use of unqualified indoor playground equipmen. Materials should be rejected by manufacturers. Since there is a huge price difference between the purchase of raw materials, there will be a profitable space between qualified and unqualified, so care must be taken.